What is Waterproofing:

Importing and applying a polybit APP membrane reinforced with 180gpoly/m2 4mm Mineral finish preceded by isoPrimer- SB25.

Waterproofing includes:

  • Styrofoam:
    Importing and applying Styrofoam thermal isolation boards (5 cm*60cm*125 cm) for hot and cold climates of thermal conductivity 0.028w/mk and density between 32 and 35 kg/m3 as minimum.
  • Solvent base primer paint:
    Supplying and applying primer paints on the exterior walls of your building on one layer with a special primer that is non-ionic bitumen coating consists of solvent based bitumen that its finish is strong and prevent water and vapor leakage.
  • Rubber seal solvent base paint:
    Supplying and applying RUBBER SEAL on the exterior walls of your building with a liquid and cold applied waterproofing based in rubber latex which dries to a tough black seamless flexible waterproofing and vapor proof membrane with a very good adhesion to most substrate preceded by primer paint. This material can elongate to 700%.
  • Water base  primer paint:
    Supplying and applying topseal waterbase primer paints on the exterior walls of your building on one layer with a special primer that is non-ionic water based coating consists of water based bitumen manufactured to conform to ASTM D1227 TYPE 111.

Azzam Proof T


Azzam Proof (T) waterproofing system. it is a two component system special admixture and dry powder from part (A) and liquid modified part (B), effective in creating waterproof eliminating possible water leakage through construction joints where separate concrete pours meet.
Cementitious acrylic waterproofing paint:

  • Flexible waterproofing membrane, perfectly protects walls and floors.
  • Excellent adhesion to concrete.
  • Beneath tiles and bathrooms, balconies and terraces.
  • Flexible-will bridge drying shrinkage and hairline cracks.
  • Excellent for swimming pools and water tanks.
  • Ease of application.


  • Azzam Proof (T) for concrete and masonry surfaces.
  • Concrete block walls.
  • Reservoirs and storage tanks.
  • Tunnels and pipelines.
  • Bridge decks.


  • Stops water movement through concrete.
  • Provide excellent resistance to waterborne chemicals such as sulfates and chlorides.
  • Easy to mix and place.
  • For all new above and below grade concrete that will benefit from waterproofing corrosion protection.
  • Tunnels and pipelines.
  • Protects reinforcing steel against corrosion contact penetration.
    Be sure to cover the entire contact area of the joint.

Surface Preparation:
Concrete surface to receive water stop materials, must be dry, sound, clean and free of contaminants. Remove any form oils, release agent that could weaken the bond. Don’t leave any standing water. All splashed areas of concrete should be repaired before application of Azzam proof (T)


1KG of  proof (T) part (A) per sq. meter at 1mm thick.


25KG Paper Bag.
6 Liter pail.

Azzam Proof R

Azzam proof (R) is a fluid 100% acrylic white pigmented curing compound that when applied to the cementations surfaces breaks down to form a non-penetrating continuous white film.

Flexible pure acrylic paint coating:

  • 100% acrylic white pigmented.
  • Water-based ready to use.
  • Protective membrane.
  • Drinking water  safe.
  • Solar reflective.
  • Highly resistant to rain, dirt and to UV aging and temperature changes.
  • Highly flexible


  • Azzam proof used for concreting generally.
  • For interior and exterior walls.
  • Specially developed to waterproof concrete, masonry building and storage tanks .
  • As a waterproof coating for roofs.
  • For above or below grade application.


  • Excellent adhesion bonds to porous and nonporous surfaces.
  • Breathable – whilst repelling water, allows substrate to breathe.
  • Contains additives for anti fangs and bacteria growth.
  • All surfaces should be washed free of dust and dried before application.
  • All splashed areas of concrete should be repared before application of Azzam proof (R).
  • All traces of contamination must be physically removed.
  • Crumply unsound patched should be removed and the surfaces made good.


  • Azzam proof (R):
    Depends upon the texture concrete surface
  • Azzamcrete (R):
    1.5 meters per liter

20L Pail